Cooling Tower Manufacturer: JLCT Open, Closed and Industrial Towers
Zhejiang Jinling Refrigeration Engineering Co., Ltd. makes cooling towers under the JLCT brand, from cross-flow and counter-flow open towers to closed circuit and large industrial units. JLCT traces its origins to 1983.
- JLCT origins
- 1983, Zhuji
- Employees
- more than 200
- Site area
- nearly 40,000 m²

JLCT cooling towers and parts
- FRP cooling towers
Open cross-flow and counter-flow tower models with FRP casings.
- Industrial cooling towers
Towers for process cooling, including multi-cell and JBN large industrial towers.
- Commercial cooling towers
Towers for HVAC chiller plants in commercial buildings, including low-noise types.
- Closed circuit cooling towers
JNC cross-flow and JFC counter-flow closed circuit towers that keep process fluid in a coil.
- Cooling tower parts
Replacement fill, drift eliminators and spray nozzles.
- Certifications
CTI certification codes for the JNT, JNC and JFC series, and ISO management system certificates.
Cooling Tower Manufacturer: JLCT Open, Closed and Industrial Towers
Zhejiang Jinling Refrigeration Engineering Co., Ltd. sells its cooling towers under the JLCT brand; JLCT traces its origins to 1983, when it was founded in Zhuji City, Zhejiang Province, China. More than 40 years of work built it into a cooling tower manufacturer and refrigeration equipment maker that integrates R&D, manufacturing, sales and service, working across the JNT cross-flow open tower, the JFT counter-flow open tower, the JNC and JFC closed circuit towers and the JBN large industrial tower.
CTI certification codes are listed per series: the JNT cross-flow open cooling tower is listed with CTI certification code C28A-05R08, the JNC cross-flow closed circuit tower C28B-09R02 and the JFC counter-flow closed circuit tower C28D-24R00, and the JFT counter-flow open tower has passed CTI certification. Send flow rate, water temperatures, wet-bulb temperature and site conditions through the enquiry form.
How an Evaporative Cooling Tower Works
A cooling tower rejects heat from circulating water by bringing it into contact with air. A small share of the water evaporates and carries heat away, and the remainder returns cooler to the plant. Cross-flow towers pass air across the falling water; counter-flow towers pass air upward against it. The guide to evaporative cooling sets out the full working principle.
Cool water tower and water cooling tower are everyday names for the same equipment, so the principle above is identical whatever term a specification uses. Selection still depends on flow rate, water temperatures, the wet-bulb temperature at the site and available space.
Matching a Tower Type to Your Application
A water cooling tower serves chiller heat rejection for HVAC, process cooling and industrial cooling. The JNT cross-flow open tower and JFT counter-flow open tower cover FRP open duties, and the crossflow versus counterflow guide explains which layout suits a site. Heavy heat loads go to the JBN large industrial tower.
- FRP open towers: JNT cross-flow and JFT counter-flow
- Large industrial towers: JBN
- Commercial and HVAC cross-flow towers: JNT
- Closed circuit towers: JNC and JFC
- Parts: PVC fill, drift eliminators and spray nozzles
Closed circuit towers hold the process fluid inside a coil, away from the air and the spray water, so it picks up neither dirt nor oxygen; the closed circuit cooling guide covers where that matters. PVC fill, drift eliminators and spray nozzles are part of the supply. A duty that fits none of these groups can go through the enquiry form.
Cooling Tower Systems for HVAC, Process and Industrial Plants
JLCT cooling tower systems divide by circuit type. The JNT cross-flow open tower and JFT counter-flow open tower are open-circuit machines where process water meets air directly. The JNC and JFC closed circuit towers hold the process fluid in a coil, with spray water outside it. The JBN large industrial tower covers heavy process duties.
Because the fluid stays inside the coil, its chemistry stays under control while spray water carries heat away by evaporation.
Inspection reports are published for the JNT, JFT, JNC and JFC series, so test results can be read per series. Selection uses flow, water temperatures, wet-bulb temperature and site conditions; include the site noise limit and the measurement point.
How to Shortlist a Cooling Tower Supplier
Comparing cooling tower suppliers is a matter of evidence. Check whether the company manufactures what it offers, which series it publishes with which CTI codes, and whether inspection reports are available. Payment is by L/C and T/T, average lead time is about one month and is confirmed in the quotation, and the stated warranty is 12 months after commissioning or 18 months after shipment, whichever comes first, except for artificial damage.
Manufacturers differ most in what they can show. Jinling works from a Zhuji site of nearly 40,000 square meters with more than 200 employees and 25 R&D engineers, and runs a thermal performance test lab. Its series were developed in close cooperation with the University of Shanghai for Science and Technology, and it holds designation as the Zhejiang Provincial Cooling Technology Enterprise Research Institute, with ISO 9001, ISO 14001, ISO 45001, CCTI and CE certificates.
A cooling tower supplier also has to reach the site. JLCT products cover more than 300 cities across China and are exported to more than 50 countries and regions on six continents, with main markets in North America, South America, Southeast Asia and the Middle East, plus the domestic China market. Delivery questions for a project go through the enquiry form.
Jinling manufactures cooling towers and refrigeration equipment, integrates R&D, manufacturing, sales and service, sells under the JLCT brand, is a national high-tech enterprise and holds an AEO Certified Enterprise certificate. The warranty is 12 months after commissioning or 18 months after shipment, whichever comes first, except for artificial damage. Further company questions go through the enquiry form.
How an order runs
- Send your requirements
- The circulating water flow rate, inlet and outlet water temperatures, design wet-bulb temperature, site and noise conditions, the tower type you have in mind and the quantity.
- Tower selection and quotation
- Jinling matches a JLCT tower series and model to the duty and replies with a quotation that states the configuration and the order terms.
- Lead time
- The average lead time is about one month in both peak and off seasons; the lead time for each order is confirmed in the quotation.
- Payment
- Jinling accepts payment by L/C and T/T; payment terms are confirmed in the quotation.
- Warranty
- For cooling towers, the warranty runs 12 months after commissioning or 18 months after shipment, whichever comes first, except for artificial damage.
Request a quotation
Tell us the tower type, flow rate and quantity you need.
Or write to sales@coolingtowerfactory.com